Posted by scott 56 [162.158.255.5] on Saturday, January 02, 2016 at 15:53:42 :
In Reply to: Does shear pin extend outside? By the way a Zerk in yoke posted by Chris Case [108.162.215.90] on Saturday, January 02, 2016 at 13:45:18 :
The shear pin had a round head on one side and sticking out but slightly bent on the other end. I ground off both ends so I could tap out from either end. Would not come out with punch from either side. The movement is not free play since I can move it with my fingers and the shaft does not move at all. Just picked up a pickle fork and will try that before drilling out. The zerk hole is there without a fitting installed.
Follow Ups: