Re: Fittings or Tight line bend


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by daveyKinPa [65.78.124.141] on Thursday, December 10, 2015 at 19:26:08 :

In Reply to: Re: Fittings or Tight line bend posted by Milo in Pa [71.116.18.235] on Thursday, December 10, 2015 at 18:30:03 :

Hello Milo,

Yes I have just a different design.

My set is only for one size, like 3/16" or 1/4", they work OK depending on the tubing.

If you use steel tube the bends are not as sharp and may flaten out or kink. Nickel/copper does bend much easier.

Could you use a stainless steel braided flex line for that area?

HTH



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com