Posted by Keith in Washington on Thursday, September 20, 2001 at 12:15PM :
In Reply to: different axles posted by dana on Wednesday, September 19, 2001 at 5:31PM :
Somebody must have changed axles if the bolt hole patterns are not the same. No manufacture would put a truck or car on the road with different wheels front and rear.
If I am correct the 1/2 ton and 3/4 ton and PW (Flatfender)wheels all have the same bolt pattern. You should not put 1/2 ton wheels on a 3/4 ton or PW (Flatfender) as there is a clearance problem with the larger brake drum that these trucks have.
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |