Posted by Dan (NH) [173.9.49.14] on Tuesday, December 08, 2015 at 13:43:27 :
In Reply to: con rod bolts posted by Glen of Idaho [72.173.64.59] on Tuesday, December 08, 2015 at 10:28:11 :
Only difference I would see is if the bolts were weighed, even then they would match.
When I have my rods machined- the caps are on and bolts are tight. As long as it is the same cap going on the same rod, the bolt holding it together could be replaced. Keep in mind it should be the same as the others.