Posted by clueless [201.237.44.50] on Monday, October 26, 2015 at 19:57:39 :
In Reply to: Re: Different tubes, or tubes in backwards. nm posted by CSCameron [75.171.71.193] on Monday, October 26, 2015 at 18:07:34 :
otherwise your screwed as far as duals with that disc set up
you could do a 3/4 spacer which needs to have beveled holes on both sides like the wheel holes and big rig lugs
i don t like the spacer it puts the load too far out on the spindle
you could go back to rear drums and bevel the od of the drum like i did when i ran mine
if you could find a two piston caliper that might work as i don t think they are as tall but that is a whole nuther reengineering project
i am working on a disc brake set up that will clear but not near done yet
Follow Ups: