Just put my Windshield Together!


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Willy-N [72.171.192.61] on Tuesday, October 20, 2015 at 17:44:12 :

You need to be fast when you do it! I taped off all the frame except the slot first. If you don't you will have that 3M stuff on the frame when you put the halves together. First make sure the glass fits and mine fit perfect just the same size as the old stuff. I put the sealer in the section with the post first and the other haft sides right on. You need at least 4 good clamps ready to go. 3 across the narrow section and one the full length with rubber tips on them. Takes a while to press it all together to get the screws in but don't wait to long!! You need to keep tightening them up till it closes put the screws in to make sure it is together. Leave them on to seat the glass good. Some squeezed out but it is only on the glass. I hope to just use a razor blade to get it off. Glad I taped it up to keep it off my nicely painted up frame! The stuff is really sticky so gloves are handy to keep it off the fingers. Not sure how fast the Fast Setting Sealer" sets up but time will tell and then I can pull the clamps and tape off to clean the glass off. Can't put the 2 little seam covers on yet or the center cover due to the tape and clamps in the way. Easy job but again you need to be ready to do it and not look for the clamps later. Took 3/4s of a tube for the project and to save my hands I used 12" PVC Handles to make the squeeze part easy to work, it comes out slow even all warmed up.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com