Posted by Ken See on Wednesday, September 05, 2001 at 1:13PM :
In Reply to: Re: HP rating of a factory PTO for a B-4-PW? posted by Kurt Hirte on Wednesday, September 05, 2001 at 10:13AM :
My brother has a 47 wdx with a St. Paul dump body, I'm not sure what the pump or cylinder is. The cylinder has a data plate but I don't recall the name. The pump is mounted as part of the cylinder and goes with it as it raises. The pump is driven by two shafts (or one with 3 u joints) that moves along with the cylinder and pump but the other end is fixed with the pto. Not sure if it's factory although the truck frame is reinforced with a long plate 3/8" or 1/2" thick, about 12" high and runs the length under the cab and bed between the shock mounts. The plates are riveted with those factory looking large rivets. We've never seen another one.
|
Follow Ups:
This board is powered by the Mr. Fong Device from Cyberarmy.com |