Posted by Kevin in Ohio [104.240.172.200] on Thursday, August 13, 2015 at 23:34:48 :
In Reply to: Re: Thanks to ALL for the Help! posted by Dana in Ma [73.142.160.201] on Thursday, August 13, 2015 at 16:30:04 :
I just like using filler on raw steel because it's easier to feather out without dealing with the epoxy to clog the paper up. I do completely sandblast or get it all to clean metal prior to any smoothing.
The epoxy I use says recoat within 24 hours or you had to scuff it up so you would have good adheasion. Epoxy is like a glue effect while etching primer bites into the steel.