Re: Working on Hitch Mount Picture


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Willy-N [72.171.192.60] on Wednesday, August 12, 2015 at 22:31:30 :

In Reply to: Re: Working on Hitch Mount Picture posted by Bill in pa [70.199.2.73] on Wednesday, August 12, 2015 at 21:18:17 :

I want to build two push points into the frame sides closer to the cab to hold the cylinder ends. So I will build the frame first that can raise up for the bed to bolt to. My cylinders are 36" X 1 1/4" Bore and Dual Action 2800 PSI. One line will solve the angle and what may be in the way. The hinge plate will be 1/4" thick and under the bumpers and hitch side plates. The cylinders will push on the bed frame about 3-4' from the hinge.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com