Re: Drill first, then if you missed, drill later too.


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by bobyepsr [70.199.4.63] on Monday, July 27, 2015 at 17:46:37 :

In Reply to: Drill first, then if you missed, drill later too. posted by Chris Case [108.225.237.77] on Monday, July 27, 2015 at 13:38:27 :

Thanks Chris, First is what I felt was right, but just wanted to hear it from someone else.
I know the dowel trick, as a matter of fact I just walked in from doing it to the new bushings I put in the t-case levers. I also replaced the pivot pin on the bracket. I didn't have a pin turned with the step down. I used a thicker bushing and the smooth shaft from a 5/8 bolt. That way it fit the mounting hole in the bracket and the newly bushed leavers. Still need to drill for cotter key and weld the pivot post in place.
Jim



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com