Posted by Willy-N [72.171.192.61] on Saturday, June 06, 2015 at 01:30:11 :
In Reply to: Re: MU2 Winch Picture and Bumper posted by Chad in PA [67.234.20.234] on Saturday, June 06, 2015 at 01:12:15 :
That sprocket would need to come off for the PTO drive shaft U-Joint Yoke and Shear Pin. That Pillow Block Bearing is wrong for a PW you need the Casted End with the bronze bushing and grease zerk like on mine. You also need the Clutch Dog Level to engage the drum and drum brake. Look inside first before you start buying outside parts.
Follow Ups: