Did you use shims? Did you check the raceway?

Posted by Eric B. [99.100.188.112] on Monday, June 01, 2015 at 18:51:16 :

In Reply to: 66' W100 Dana 44 Closed Knuckle Problem posted by Bob Perry [68.41.17.66] on Monday, June 01, 2015 at 18:24:01 :

If the race didn't drive in the same into all the raceways then you may have a worn raceway. The driver side lower is the most common to wear.

If you didn't follow the service manual and adjust the shims under the top cap to create the correct tension that might be your problem.

Eric

Follow Ups:

• Re: Eric B. - Bob Perry 21:00:33 06/01/2015
  • you have to se the pre load with the shims - clueless 10:59:03 06/02/2015
  • Sent you a message ntxt - Eric B. 21:15:01 06/01/2015

Post a Followup