Posted by clueless [186.15.43.95] on Sunday, May 10, 2015 at 00:12:26 :
In Reply to: Clueless..... posted by Randy On Long Island [104.207.219.30] on Saturday, May 09, 2015 at 15:28:30 :
knows what he is doing--the scrappers stole my rust bucket of a wm i was gonna someday finish--i was so mad they did i googled dodge 6x6 for sale and now i have three wc63s in way better shape than he ole wm
the other catch is what size tires are you going to run--some are wider than others and will affect the dually offset
i don t really like the idea of turning down the drum so i like the idea of running a stock inner and i don like the spacers
there is enuff room to move one center out 3 in. or more on the fixed rim side of the wheel but the inner diameter of the wheel there is a tad wider than the center but a good maching shop could weld it in
i was looking at my wheels again today
i have popped the rivets on one wheel and separated the center from it--
so all you have to do is take 2 wheels to a machine shop hve them pop the rivets and weld the centers back in where they will give you at least an inch of clearance between the tires and then you don t need any spacers and can just bolt them to the stock wheels which will now be the inners