Posted by Willy-N [72.171.192.59] on Thursday, April 30, 2015 at 02:20:08 :
In Reply to: Re: Bolted Up Sections Picture posted by Willy-N [72.171.192.59] on Thursday, April 30, 2015 at 02:09:24 :
This is the other side showing the plate meeting the cross member edge. There is another bolt out of the picture. 2 bolts go thru the cross member and one on each end thru the frame bottom. The outside plate above the bend has 6 bolts and the top strip will have 2 adding up to 12 on each side. I will replace these bolts when it goes back on painted.
Follow Ups: