Re: Got one.

Posted by Dean [70.211.66.8] on Thursday, April 02, 2015 at 15:24:20 :

In Reply to: Re: Got one. posted by jason witzel [67.135.144.173] on Thursday, April 02, 2015 at 14:47:46 :

Yes as long as it came with a 4spd np420.
Remember the input shaft from the PW is different
in length so you need one from a 315 PU
which didn't have a PTO port on the driver side
for a winch. Clutch fork uses the same throw
out bearing as PW.

Follow Ups:

• Re: Got one. - Kaegi 17:02:11 04/02/2015
  • Re: Picture of clutch fork. - Dean 21:31:20 04/02/2015
    • Re: Picture of clutch fork. - Kaegi 02:36:06 04/03/2015
      • Re: Yes ntx. - Dean 08:15:49 04/03/2015

Post a Followup