Posted by Willy-N [72.171.192.60] on Thursday, March 26, 2015 at 23:39:00 :
I guess some call them up/grades other than Original. My list; On Board Air System and tank on the frame, Stereo 4 speakers & amp hidden except the radio. A 105 Amp one wire alternator, 100 amp shunted gauge and old style/new water temp gauge in existing holes in dash these both are Steward Warner. A Miniature set of 3 gauges for under the hood for checking engine while under hood. I will put them sorta out of site. 5 Roof Cab Lights over existing bolt holes. Arrow Turn Signal Lights on front fenders above wheel tops.I picked up a real small 0-15 PSI liquid filled fuel pressure gauge to go on the carb and a tap off the line for draining the system. With the back up electric fuel pump it could come in handy. Adding extra fuel filtering in-line plus what is on the manual fuel pump. New Plastic 14 gal Jeep Style Fuel Tank. The battery will be a Semi-Truck one mounted in a side tool box with the 12VDC 150PSI air compressor. Tires will be STA's on Combat Rims all the way around. 2 Side mount 30" Locking NICE tool boxes in front of the rear wheels behind the cab level with the running boards. The seat is a toss up still as I have a not original old bench one but might like new? I will make my own head liner and wiring harness hooked into a Marine Rated Fuse Panel under the dash. Last part is the bed and I will have it bent up for me locally. It will be like the 1st Series Bed smooth side with stake pockets but 10 ft long and 1/8" sheet steel for some extra weight on the axles driving empty. The inside of the bed will be sprayed on Commercial Bed Liner. Other than a newer 2" box receiver hitch and some little stuff that's it. Unless I can come up with other things not requiring cutting holes or modifying the frame more.
Follow Ups: