Posted by clueless [201.205.49.41] on Sunday, March 15, 2015 at 18:36:49 :
In Reply to: Vaughn Picture of piston stop/chamber posted by Willy-N [72.171.192.117] on Sunday, March 15, 2015 at 02:20:42 :
willy piston stop at the same place in either motor the cranks and rods are different
if you wanted the piston to stop higher you
could use the 218 crank with the 230 rod but that might put it out the top of the block
this was discussed on some hot rod forum also but they used an other after market piston