Transfer case questions

Posted by Kirk ct [66.212.203.173] on Monday, March 02, 2015 at 18:23:35 :

Been working thru restoration of the transfer case over the last few weeks. Had it down to an empty case. Did a full inspection of all the bearings and gears which seemed good.

Replaced all the seals and it's back together

Questions

Is there a torque spec for the input shaft nuts to get a certain load on the bearings?

Is there a sequence to the torque.

To check that the shim stacks are sized properly what do I need to measure?

Recommendations for oil? And what is the capacity?

Thanks in advance
-Kirk

• Transfer case

Follow Ups:

• Re: Transfer case questions - Vaughn 21:54:46 03/02/2015
  • Re: Transfer case questions - wayneh 22:03:49 03/02/2015
    • Re: Transfer case questions - Vaughn 22:23:58 03/02/2015
• Re: Transfer case questions - wayneh 20:13:27 03/02/2015
• Re: Transfer case questions - Kirk ct 20:02:58 03/02/2015
  • Re: Transfer case questions - wayneh 20:19:27 03/02/2015
    • Re: Transfer case Fun - Willy-N 22:14:45 03/02/2015
      • Re: Transfer case Fun - wayneh 06:52:46 03/03/2015
        • Re: Transfer case Fun - Willy-N 11:31:26 03/03/2015

Post a Followup