Posted by Vaughn [99.14.89.24] on Friday, January 02, 2015 at 12:47:17 :
In Reply to: Bellhousing ? posted by Kirk ct [66.212.203.173] on Friday, January 02, 2015 at 08:17:18 :
T/O Bearing - Timken# - 2065, NAPA# 1087
If the wear on the clutch release fork shaft is not deep (1/2 thickness of a new bushing), and no scoring on the bearing surface of the shaft, you can use it.
The spring attaches to the T/O bearing sleeve and the bell housing above the transmission bearing retainer.
Replace the bushings.
You need to have the cover attached to keep dust, dirt and rocks out of the clutch unit.