Posted by Kaegi [76.22.23.236] on Wednesday, December 17, 2014 at 12:49:41 :
In Reply to: priming oil pump posted by scott 56 [24.130.235.145] on Wednesday, December 17, 2014 at 12:37:11 :
it will stay full of oil sitting. I don't submerge it I just pour a little oil in, spin pump, and keep doing that until its full, then install. make sure you install with the roll pin in the gear pointing straight up so the dist slot ends up at seven o'clock, and that is with engine on TDC.