Posted by Dozerman51 [108.235.117.172] on Thursday, November 20, 2014 at 17:45:50 :
In Reply to: Still looking for 1/2 ton WC thrust buttons posted by Galen [214.28.226.228] on Thursday, November 20, 2014 at 09:15:05 :
No Thrust button is used on the Rzeppa joints. The only thing used to adjust the "Float" are steel shims which look like metal gaskets which are placed between the outer shaft drive flange and the wheel hub , to provide correct operating position of the universal drive assembly. The correct "Float" needed using the metal shims is .052". You use two .020", one .007" and one .005" shim.
Follow Ups: