Posted by RDavis on Wednesday, August 01, 2001 at 1:24AM :
In Reply to: Accelerator Binding posted by Drew Rogers on Tuesday, July 31, 2001 at 2:01AM :
Some yrs back, maybe late 80s-early 90s,there was an article in the PWA about a novel rear cab mounting system.It took the flex out of the cab when on rough uneven terrain that is associated with the stock setup. Imagine a flat bar attached to to the rear original cab mounts, accross underside of the cab and a simular bar attached to the frames rear cab mounts with a single mount ,centered and between the two bars allowing the rear of the cab to pivot from a centered rear mount elimanating the cab flex. Of course the bars had bends in them but I have no measurements for it. Maybe the owner of the modified truck or someone with more info about it could post it for everyone. Your problem is one common to the WDX-WM300 trucks and the rougher and more uneven the terrain you drive over,the worst the problem seems to be with the stock cab mounting setup. Its definitely worth a look.
|
Follow Ups:
This board is powered by the Mr. Fong Device from Cyberarmy.com |