Posted by Don Scott on Monday, July 30, 2001 at 1:17PM :
In Reply to: How do I loosen lug nuts? posted by Dave on Monday, July 30, 2001 at 11:49AM :
I used a 3/4" drive breaker bar with a 6 foot pipe slid over it. Sometimes I had to do a little jumping on the pipe. This was on a '48 B1 with pretty hefty studs and nuts. A little heat does wonders to keep from breaking off studs.
This board is powered by the Mr. Fong Device from Cyberarmy.com |