Posted by Randy On Long Island [63.117.245.30] on Saturday, September 06, 2014 at 14:03:10 :
In Reply to: Re: Paging Josh With Dually rims posted by Dave Hibberd [24.91.91.72] on Friday, September 05, 2014 at 22:35:22 :
There are numerous ways to accomplish the task. It has been dicussed many times on the Forum and can be accessed in the 'archives. Using one regular rim and one dually rim requires a spacer about 5/8" thick and long inner Budd nuts. Using two dually rims has been accomplished by a Forum member by grinding a slight amount from the drum to allow the rim to clear. That method allows the use of standard length inner Budd nuts and no spacers are needed. The method I was using involved a spacer that bolted up to the wheel studs and used two dually rims and standard length inner Budd nuts. One spacer was stolen, along with the rim. Will probably be costly for me to have one fabricated.
Follow Ups: