Posted by Brian in Oregon on Tuesday, July 17, 2001 at 11:50PM :
My Mopar windage tray arrived today. Less instructions.
The four main cap bolts have eight washers. I presume that the 360 uses one washer under each cap and the 273/318/340 use two washers under each bolt. Indeed, I the bolts bottom out without a washer, and the windage tray bottoms out on the 318 skirt rails and the oil pan won't fit. With two washers on each bolt all is fine. I just want to make sure two washers under each bolt is correct. Too much is riding on these bolts to guess.
|
Follow Ups:
This board is powered by the Mr. Fong Device from Cyberarmy.com |