Posted by scott in ny on Friday, July 13, 2001 at 2:55AM :
In Reply to: m37 door glass replacement posted by Kurt Hirte on Thursday, July 12, 2001 at 9:09AM :
pretty simple...just did it...remove the inspection plate.....roll window down.....remove (2) clips on regulator at bottom of window....pop the regulator out from the window....push up on the glass and remove...it will take you a couple minutes each side...regulators are a breeze to change ...just unscrew them....it will take you no time.....when i removed all the guts from the doors in my m-43, i sprayed old motor oil and diesel mixture into the inner door to slow down the rusting process with an old garden sprayer....i spray the underside of all my rigs and trailers once or twice a year....slows the rust down....just my opinion...good luck
|
Follow Ups:
This board is powered by the Mr. Fong Device from Cyberarmy.com |