Posted by clueless [201.203.46.19] on Monday, June 02, 2014 at 23:00:22 :
In Reply to: Re: Dual Rim Pics for Clueless posted by dave horvath [76.125.248.166] on Monday, June 02, 2014 at 21:57:16 :
2 in. much less 1 1/2 is not enuff to give you any tire clearance to bolt to the stock rim, they must have used a spacer with factory off set to stock or maybe bolted thos two together but that don t sound right as it would give you and 1 1/2 in. clearance between tires which seems a bit too much
the 9.5 would bolt to another rim that was moved the same and that would give you an inch between tires
i figure you can move one rim out 2 3/4 and bolt the stock wheel to it and you get 3/4 clearance which seems ok to me
you don t have to turn the ear on the drum much to get it to clear and since the wheel tapers as it goes in if you cut the drum ear on an angle you don t have to cut to much and you still have some ear left
looking at mine i think i could move one out 2 3/4 but i have not tried yet
doesn not look like the ear has been turned down in the pic and they probably thought they were just gonna move centers and bingo dualls
did you get two each of those--if you did they probalby moved em out that much and thought they were gonna bolt up
be curious to see what other off set rims you have and how they are moved out
Follow Ups: