getting discouraged and now


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Nick [99.100.212.49] on Monday, March 31, 2014 at 20:35:57 :

I have two more trucks that need repair.

I was working on the master cylinder conversion, to the 70s Dodge dual MC. Made the plate, mocked up the piece of frame I cut off from the original frame. Went to try it on the truck and its not fitting. Decided to take it for a drive and relax. The shimmy is back, and as strong as ever. Im getting discouraged. I am now doubt putting on the discs. I had no problems with the drums, I shoulda left well enough alone.

Then the check engine light came on in my 05 Duramax. We checked it in the shop the other day. Boost sensor was going bad. And lots of oil in the air to air cooler pipe. So I took it to a local diesel shop, he put it on his scanner, same codes. He thinks its just the vain position sensor. 500 bucks from Chevy. Found one on ebay for 200. He said try the sensor first, if that doesn't work then the turbo needs to be replaced, at 1800 bucks just for the turbo.

Brought the dakota to the tire shop. Needs tires, shocks, brakes and all the rubber in the front suspension is worn or gone. Needs new ball joints, probably A arms. So tires shocks brakes and suspension, 1800 bucks

I got three trucks in the driveway and all three have something wrong with em



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com