Posted by Chriscase [107.194.22.238] on Thursday, February 20, 2014 at 18:28:52 :
In Reply to: Rear Inner Hub Seal Problem? posted by CSCameron [174.26.88.197] on Thursday, February 20, 2014 at 17:54:23 :
Yes, the seal has room before it hits the bearing.
It's a skinnier seal, so no prob not coming to the lock ring.
I think there is plenty of spindle surface for the seal to contact. But if you want to check that, smear some grease on the spindle surface and instal the hub, then remove the hub and see how far in the grease got pushed.