Update on my clutch / slave cylinder issue


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Tim Holloway [69.54.28.229] on Wednesday, February 12, 2014 at 18:57:11 :

So last Saturday I managed to get the PW into the shop. I let it melt off for a while and today was the first chance I had to check it out. A friend had dropped by the shop, so I asked him to push in the clutch while I watched the slave. It moved about an inch, so I decided it wasnt the slave, or the master, if they worked that well. Still thinking of the possibility of the disc being stuck to the flywheel I blocked the clutch pedal with a stick, pulled the cover and slipped a very thin putty knife in between the disc and the flywheel, turning it all the way around once. Still no change, grind grind grind. Then it occurred to me to adjust the pushrod. I turned the nut a couple of turns, no change, a couple more, no change, than a couple more and voila, she slips right in easy as pie!
Happy days!
Tim



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com