Posted by Gordon on Wednesday, June 20, 2001 at 5:24PM :
In Reply to: What is trick to removing door latch from WC-12 posted by Charlie on Wednesday, June 20, 2001 at 4:54PM :
.... but from memory you have to pull the window regulator and window before you can get this stuff out (or in for that matter)
It's all pretty easy except for the main handle square drive, which is always rusted into place in the main latch mechanism, so any time you have the door facing off always squirt penetrant on that 1/4" square drive.
When you have it all off it's possible to tweak almost all the bits to tighten them up back to proper working order, the one exception seems to be the input drive gear on the window winder mech - if it's gone, it's gone....
Gordon
|
Follow Ups:
This board is powered by the Mr. Fong Device from Cyberarmy.com |