Posted by mannyc [173.77.217.68] on Saturday, February 01, 2014 at 12:52:38 :
In Reply to: Re: brake drum removal posted by gmharris [72.219.148.98] on Saturday, February 01, 2014 at 11:31:30 :
get one of the above and a drag link socket. they come right out. if the screws in good shape, run them through a die and clean them up. use antiseeze and you wont have the problem again. if you are smarter than most, pull the drums and hubs as a unit. no need to separate them. getting them turned? they need to be on the hubs. doing your brake pads, time to repack the bearings. no real need that i can see to take them apart. except weight.
