Brakes are next looking for inputs


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by scott 56 [24.130.235.145] on Thursday, January 02, 2014 at 16:05:46 :

While the engine hunt is on for the 48 FFPW, I have moved the power wagon off the street into my garage. It is under the house so once it's down there, it will have to come out under its own power. I started with the front and removed the drums, brakes and brake cylinders. The first cylinder doesn't look too bad but the metal piece that fits the end of the spring is damaged. The rebuild kits only seem to have the rubber cups and boots. The parts list on the site isn't much help. Any suggested parts sources for rebuild kits, flex lines, master cylinder or new brake cylinders? Also the brake themselves look almost new with 1/4 inch or more material but it is not riveted. Thanks for sharing your expertise.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com