Posted by jerryinidaho [64.234.49.226] on Wednesday, January 01, 2014 at 15:16:32 :
In Reply to: Re: or...... posted by mark c. cutter [198.228.217.143] on Wednesday, January 01, 2014 at 14:14:43 :
I used a piece of rectangular tubing for the rear bumper on my W300. I think it's 2" x 8". I cut round holes through both sides, then welded the appropriate size tubing inside the cutouts. Then mounted the recessed lights like Kevin shows inside the pipe. One pair of stop/turns, one pair of clear backups. They are slightly recessed. Then I cut an angle on the ends of the bumper and welded a little plate over to close it. The only problem I have had is if I back into deep, packed snow, it will crack the lens. But you probably don't have to worry about snow. Ha Ha
Follow Ups: