Posted by Daryl in Oz [116.240.129.48] on Friday, December 27, 2013 at 16:45:34 :
In Reply to: Wrist pin bushing fell out posted by don in nh [96.61.72.163] on Friday, December 27, 2013 at 13:21:28 :
Bushings are normally pressed in, then reamed (if needed) to suit the pin, which is quite a firm fit, but should be able to just push it in by hand. This engine sounds to be totally trashed (worn out) but shows you just how tough they are to keep going.