Posted by don in nh [207.121.73.19] on Tuesday, December 10, 2013 at 13:29:35 :
In Reply to: Re: Piston ring end-gap, perhaps too large? posted by Chriscase [107.194.26.159] on Monday, December 09, 2013 at 23:30:19 :
Somehow I do think that I got it correct this time. I've been reading about pistons, and they are infact oval (which is what I had measured out). My measurement was one the short axis, and was 3.280 (or so). I will have to check the large axis which will be closer to the bored 3.290.