Re: Should have said, "More resistant to cracks".

Posted by Tim H. in NY [69.195.60.125] on Monday, December 02, 2013 at 01:09:51 :

In Reply to: Should have said, "More resistant to cracks". posted by gmharris [71.105.35.249] on Sunday, December 01, 2013 at 13:11:54 :

And explain the lack of coolant problems. Either way... I value the feedback. Due to the lack of coolant symptoms, and that this is not a common failure area I've reassembled. With a .030 brg in #6 and +.001 brgs rounding out, I've got .002 clearance (approx) across the board. If this turns out poorly I will let you all know. Until then, no news is good news.

Follow Ups:

• Re: Should have said, "More resistant to cracks". - Kaegi 17:50:07 12/02/2013
  • Re: Should have said, "More resistant to cracks". - Tim in NY 14:07:41 12/05/2013
  • I have the tool - Sherman in Idaho 00:26:19 12/03/2013
    • I would like to have seen that in operation. - gmharris 20:49:00 12/03/2013
    • Re: I have the tool - Kaegi 00:49:33 12/03/2013

Post a Followup