Posted by Vaughn [108.79.205.118] on Saturday, November 23, 2013 at 13:15:45 :
In Reply to: Maybe Steve K can chime in posted by Nick [99.100.212.49] on Saturday, November 23, 2013 at 00:09:35 :
Additional info - 1/2 ton knuckles and wheel hubs are not the same as the power wagon, so you would have to switch out knuckles and brake backing plates if the housing width is the same and you want use it. Because the center axle line is different between a 1/2 ton and 3/4 ton, you also have to have a 1/16 steel ring made and welded to the housing to correct the off-set or you'll constantly be breaking axle ends off. Might be easier to find a true WC 3/4 ton housing if it turns out to be a 1/2 ton.