Posted by Tom Petroff (IL) [205.188.116.5] on Thursday, October 17, 2013 at 04:51:17 :
In Reply to: 230 tune up parts posted by scott 56 [24.130.234.60] on Wednesday, October 16, 2013 at 23:24:22 :
FYI
You need to check the cap diameter or Dist number before you go to the parts house.
There were two different Dist caps early was
larger cap at 3 3/8 diameter.
Later was smaller at 3 1/8 (most common)
Points/condensor are the same. Rotor is cap specific.
TGP