Posted by David Sherman on Tuesday, June 12, 2001 at 5:13PM :
In Reply to: Pilot Bushing removal posted by Tom Markert on Tuesday, June 12, 2001 at 4:59PM :
I haven't done an M37 but if it's like most you can get it out by finding a rod the same diameter as the hole, packing the hole full of grease, and hammering the rod into it. The hydraulic pressure gets in behind the bushing and pushes it out.
|
Follow Ups:
This board is powered by the Mr. Fong Device from Cyberarmy.com |