Re: Did you have your bell housing out ?


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by gmharris [71.105.36.171] on Wednesday, September 18, 2013 at 18:58:20 :

In Reply to: Did you have your bell housing out ? posted by Chris Case [107.201.17.205] on Wednesday, September 18, 2013 at 16:51:58 :

I just looked at my trucks and was about to suggest there might be a problem with the positioning of the rear motor mount.

There's plenty of clearance (about 1/2")for the clutch pedal normally. It seems that a clearance problem might be related to the motor mount/bell housing location.

I also noticed previously that the front of the engine can be off center. Check the front motor mount to see if the engine is off to one side. The front motor mount rubber will be distorted.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com