Posted by Marty [50.68.51.62] on Thursday, September 05, 2013 at 12:38:11 :
In Reply to: Re: this is what i would like to end up with posted by mannyc [173.77.221.241] on Thursday, September 05, 2013 at 07:07:05 :
Hi Manny,
This is the only pic I can find of it other than an original pic from before I restored it that doesn't really show much.
The Poly in that truck, the only thing I'd do different is use the front mount like DanM has shown below as opposed to the side mounts the Dodge dealer used on the orange truck.
The only impressive thing with the way they installed the Poly in this truck, in my mind, is that they managed to do it without butchering the truck with firewall mounted pedals & it's a tight fit accomplishing that with a mechanical clutch. The bracket they fabricated to support the LH side of the bellhousing & mount the clutch pedal was a bit crude & so I modified it a bit while I had it apart but you get the idea...nothing you couldn't fabricate as well as they did if you spend some time.
Follow Ups: