Posted by gmharris [71.105.44.68] on Sunday, July 21, 2013 at 18:25:28 :
In Reply to: Pull it all posted by Glen of Idaho [72.173.64.58] on Sunday, July 21, 2013 at 17:22:05 :
You think pulling the manifold was bad, try replacing the oil seal. There are two or three different setups.
Leave the seal alone if it's not leaking. You will be sorry if yo mess with it.
You don't need to remove the bell housing to replace the clutch shaft bushings, but I'm guessing your clutch shaft will be severely worn.