Posted by Jess [64.180.198.6] on Thursday, July 18, 2013 at 12:18:43 :
In Reply to: Re: Transmission is different posted by Doc Dave [75.139.109.12] on Thursday, July 18, 2013 at 06:48:49 :
There is a clutch difference, and possibly the input shaft size as well. Acme T98 input is larger diameter but I don't have the numbers to confirm right here. Syncro rings and those parts are available. International used the T98 and parts interchange if you can find a good parts supplier. Bill Anthony in Churchill, Manitoba has rebuilt his Acme and did find the stuff he needed. Acme pto is the same as US except for the idler gear, which are impossible to locate although they are probably sitting in some container in the back of a surplus yard, just not identified. Bill is trying to get a gear cut from a sample I sent him. Charles Talbert at M-Series Rebuild is quite familiar with the Acme and could answer questions on repairs.
Follow Ups: