Re: Question for all the engineers out there


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Glen of Idaho [12.213.224.54] on Thursday, July 11, 2013 at 20:48:33 :

In Reply to: Re: Question for all the engineers out there posted by Dave Horvath [76.125.248.166] on Thursday, July 11, 2013 at 20:23:02 :

I would use some 3/8" x 4" or what ever width your fixture is. Place them under the fixture and weld just the lower portion so you have no interference with the weld from the fixture.
Taper from a 1/2" on the outside edge to about 1 1/2" to the center like an inverted chevron. You can get more weld on it that way and prevent lammular separation on the serface grain of the bumper face.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com