Posted by bobyepsr [70.198.193.209] on Sunday, July 07, 2013 at 23:40:51 :
In Reply to: 251 0il pan? posted by Sterling From TX [99.98.76.231] on Sunday, July 07, 2013 at 16:14:46 :
Sterling, I pulled mine last week. The two bolts nearest the front were difficult. Nothing I have in sockets would make it in there. I used an old offset boxed wrench from my dads tools. I could only get a fractional turn on each try. The pan was tight coming out but should go back easier. I dug about 3/4 inch of dried out grease off the cross member. I have a new felpro gasket from autozone. I hope to have it back together tomorrow. If it all works out I'll tell you how the reassembly went. Jim
Follow Ups: