Posted by Jerry in Idaho [24.223.94.244] on Sunday, June 16, 2013 at 19:08:10 :
In Reply to: Re: Are you removing the shafts too? posted by Joe Cimoch [68.186.242.95] on Sunday, June 16, 2013 at 18:29:18 :
You should have a slip joint somewhere on the shaft. If you can get it to move (heat-wax-?) then you won't have to remove it. If you do remove it you might as well try to free up all yokes and remove, clean and lube the shaft and yoke tube.
Follow Ups: