Posted by Sal [69.206.153.226] on Sunday, May 05, 2013 at 16:59:04 :
I have a wagner dual reservoir master cylinder that I took apart to clean. It has a bolt with a copper washer on the bottom side of the casting that comes up into the bore about an 1/8 inch somewhere in between the 1st and second spool...When I took it apart I removed it 1st thinking it was some kind of bleed port, I am trying to reassemble it and the travel just does not seem right. Is it supposed to hold the travel of one of the spools or is it there for some other reason ? there is no groove on either spool piece that looks like it rides in...confused!!any help would be appreciated
Follow Ups: