Posted by Chris Case [75.36.43.54] on Wednesday, March 27, 2013 at 13:32:02 :
In Reply to: centering cab posted by JET [75.53.130.173] on Wednesday, March 27, 2013 at 10:50:55 :
I hardly see how a body can slip 1/2" if the rubbers are intact with the sleeves inside.
But you may have twisted the cab? My current project had lots of welds that had cracked due to vibrations, re-brazed. To bad it was crooked when they brazed. Too bad I didn't notice it during the rebuild phase- until I tried to sit on some plywood on the seat base. It rocked. The seat base is twisted 1/2". I've got it C-clamped to the frame, hoping to twist it back some.
Anyways, I'd attack the body mounts first, shimming as needed to get teh doors to fit best, then worry about hood fit.