Posted by Doc Dave [70.192.201.78] on Monday, March 25, 2013 at 20:27:13 :
In Reply to: transmission rebuild/inspection posted by justin in NJ [71.59.91.52] on Monday, March 25, 2013 at 11:47:59 :
I agree with Wayne. The tranny was pretty simple to rebuild; I put in new bearings and seals. Speedy sleeves also like he says.
It the shifter is "sloppy", take the tower apart too as the ball on the shift handle down in the tower may need to be welded to restore it. Again, not hard once its out.
Check out the parts interchange file on the mast head of the forum, it lists parts and tips for the tranny.